Small-form-factor PCs · Greater Chicago

Every card in the NR200P V2

Will it fit

Does the ASUS TUF Gaming GeForce RTX 5090 OC fit in the Cooler Master NR200P V2?

Tight

Yes, but it's tight: only 9 mm of length to spare; only 1 mm of thickness to spare.

Length348 of 357 mm9 mm spare
Height146 of 160 mm14 mm spare
Thickness72 of 73 mm1 mm spare
Exact measurements
SizeASUSNR200P V2Room
Length348 mm357 mm9 mm spare
Height146 mm160 mm14 mm spare
Thickness72 mm73 mm1 mm spare

Card running past the front bracket, leaving 67 mm for the CPU cooler.

Cooler Master's published spec, not yet measured by Respec

Questions

Does the ASUS TUF Gaming GeForce RTX 5090 OC fit in the Cooler Master NR200P V2?
Yes, but it's tight: only 9 mm of length to spare; only 1 mm of thickness to spare. Length 348 of 357 mm, height 146 of 160 mm, thickness 72 of 73 mm.
Which NR200P V2 layout does it need?
Card running past the front bracket, which leaves 67 mm for the CPU cooler. Inside the front bracket it is 14 mm too long.
Where do these numbers come from?
Cooler Master's published spec, not yet measured by Respec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.

Sources

  • Case: Cooler Master’s NR200P V2 specifications, checked October 23, 2026. Two published limits: 334 x 160 x 80 mm for a card that stays inside the front bracket, 357 x 160 x 73 mm for one that runs past it.
  • Card: ASUS’s spec page, checked October 23, 2026.
  • Cooler Master's length and height limits include the power connector, so a card with its connector on top needs room for the plug as well.

Check another pair with the fit checker.

Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.