Every card in the Y40
Will it fit
Does the ASUS Prime Radeon RX 9060 XT 16GB OC fit in the HYTE Y40?
Fits
Yes. The ASUS Prime Radeon RX 9060 XT 16GB OC fits the HYTE Y40 with 118 mm of length to spare.
Length304 of 422 mm118 mm spare
Height126 mmNot published
Thickness50 of 95 mm45 mm spare
Exact measurements
| Size | ASUS | Y40 | Room |
|---|---|---|---|
| Length | 304 mm | 422 mm | 118 mm spare |
| Height | 126 mm | — | Not published |
| Thickness | 50 mm | 95 mm | 45 mm spare |
HYTE's published spec
Rather have it built?
We build the RX 9060 XT into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the ASUS Prime Radeon RX 9060 XT 16GB OC fit in the HYTE Y40?
- Yes. The ASUS Prime Radeon RX 9060 XT 16GB OC fits the HYTE Y40 with 118 mm of length to spare. Length 304 of 422 mm, height 126 mm (no published limit), thickness 50 of 95 mm.
- Is anything not checked?
- HYTE doesn't publish a height limit for the Y40, so that isn't checked.
- Where do these numbers come from?
- HYTE's published spec; card size from ASUS's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: HYTE’s Y40 specifications, checked October 24, 2026. HYTE lists a 422 mm length limit and 4 full slots (95 mm) for the vertically mounted card.
- Card: ASUS’s spec page, checked October 23, 2026.
- The card mounts vertically on the included riser.
This card in other mid-towers
- Corsair 4000D AirflowFits56 mm of length to spare
- Fractal Design NorthFits51 mm of length to spare
- HYTE Y60Fits46 mm of length to spare
- Lian Li Lancool 216Fits88 mm of length to spare
- Lian Li O11 Dynamic EVOFits122 mm of length to spare
- Lian Li O11 VisionFits126 mm of length to spare
- NZXT H5 FlowFits106 mm of length to spare
- Phanteks XT ProFits111 mm of length to spare
Other RX 9060 XT cards in the Y40
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.