Every card in the T1
Will it fit
Does the Gigabyte GeForce RTX 5080 Windforce OC SFF 16G fit in the FormD T1 V2.5?
Fits
Yes. The Gigabyte GeForce RTX 5080 Windforce OC SFF 16G fits the FormD T1 V2.5 with 21 mm of length to spare.
Length304 of 325 mm21 mm spare
Height126 of 140 mm14 mm spare
Thickness≈2.46 of 2.75 slots0.29 slots spare
Exact measurements
| Size | Gigabyte | T1 | Room |
|---|---|---|---|
| Length | 304 mm | 325 mm | 21 mm spare |
| Height | 126 mm | 140 mm | 14 mm spare |
| Thickness | ≈2.46 slots | 2.75 slots | 0.29 slots spare |
Set for a 2.75-slot card, leaving 58 mm for the CPU cooler.
NCASE's published spec
Rather have it built?
We build the RTX 5080 into small PCs by hand, each tested and shipped with its own benchmark results.
Questions
- Does the Gigabyte GeForce RTX 5080 Windforce OC SFF 16G fit in the FormD T1 V2.5?
- Yes. The Gigabyte GeForce RTX 5080 Windforce OC SFF 16G fits the FormD T1 V2.5 with 21 mm of length to spare. Length 304 of 325 mm, height 126 of 140 mm, thickness ≈2.46 of 2.75 slots.
- Which T1 layout does it need?
- Set for a 2.75-slot card, which leaves 58 mm for the CPU cooler.
- Where do these numbers come from?
- NCASE's published spec; card size from Gigabyte's spec page. Checked October 2026. Makers measure differently and connectors add a few millimetres, so treat a tight result as a reason to measure.
Sources
- Case: NCASE’s T1 specifications, checked October 24, 2026. NCASE (which now makes the FormD T1) lists cards up to 140 x 325 mm and 3.25 slots, with CPU cooler height falling 5 mm for each quarter slot of card thickness.
- Card: Gigabyte’s spec page, checked October 23, 2026.
- The T1 trades card thickness against CPU cooler height: 73 mm of cooler with a 2-slot card, 48 mm with a 3.25-slot card.
This card in other small cases
- Cooler Master NR200PFits26 mm of length to spare
- Cooler Master NR200P V2Fits30 mm of length to spare
- Fractal Design Era 2Fits22 mm of length to spare
- Fractal Design RidgeDoesn’t fit1 mm too tall
- Fractal Design TerraFits18 mm of length to spare
- Jonsbo Z20Fits59 mm of length to spare
- Lian Li A3-mATXFits111 mm of length to spare
- Lian Li A4-H2OFits18 mm of length to spare
- Lian Li Q58Fits16 mm of length to spare
- NCASE M1 V6.1Doesn’t fit1 mm too tall
- NCASE M2Fits55 mm of length to spare
- Phanteks Evolv Shift XTFits20 mm of length to spare
- SilverStone SG13Doesn’t fit34 mm too long
- Sliger CerberusFits26 mm of length to spare
- SSUPD Meshroom S V2Fits28 mm of length to spare
Other RTX 5080 cards in the T1
Check another pair with the fit checker.
Based on published dimensions, not a guarantee. Check cable, cooler and connector clearance before you buy.